Switch HPE Networking 2930M 48G-PoE+ avec 1 emplacement 1U Gigabit Ethernet 1440W managed SFP

Hewlett Packard Enterprise

Switch HPE Networking 2930M 48G-PoE+ avec 1 emplacement 1U Gigabit Ethernet 1440W managed SFP

3 867,99 €(3 223,32 € HT)

🚚 Livraison jusqu'à mar. 03.11

Quantité
1

Les prix affichés sont définitifs. La commande en ligne ouvre prochainement.

En stock

Réf: JL322A

EAN: 0190017071251

Description

Switch managed Gigabit Ethernet HPE 2930M 48 ports PoE+ (1440W), 1 slot SFP, rack 1U.

Switch géré Gigabit Ethernet 1440W Gigabit SFP - Baie 1U - JL322A

Caractéristiques

Poids4.65 kg
RAM1 Go DDR3 SDRAM
Poids4,65 kg
Ports44 x 10/100/1000 (PoE+) + 4 x Combo Gigabit SFP
Hauteur4,39 cm
Largeur44,25 cm
CapacitéEntrées IPv4 dans la table de routage : 2000 Entrées IPv6 dans la table de routage : 1000 Routes RIP : 10000 Routes statiques : 256
Sous-typeGigabit Ethernet
Budget PoE1440 W
Interfaces44 x 1000Base-T RJ-45 PoE+ 4 x 1000Base-T 1 x série (console) 1 x USB Type B 1 x gestion 1000Base-T
Processeur1 x ARM Cortex-A9 : 1,016 GHz
Profondeur32,43 cm
AlimentationAlimentation interne (non installée)
PerformancesDébit : 112 Mpps Capacité de commutation : 176 Gbps Latence (1 Gbps) : 3,1 µs Latence (10 Gbps) : 3,4 µs Latence (10 Mbps) : 98,5 µs Latence (100 Mbps) : 11,8 µs
Mémoire flash4 Go
Type d'appareilSwitch - 48 ports - L3 - géré - empilable
FonctionnalitésContrôle de flux, prise en charge du duplex intégral, prise en charge DHCP, prise en charge BOOTP, prise en charge ARP, prise en charge VLAN, IGMP Snooping, prise en charge Syslog, prise en charge DiffServ, prise en charge IPv6, prise en charge SNTP, sFlow, prise en charge STP, prise en charge MSTP, prise en charge ACL, QoS, prise en charge des trames Jumbo, serveur DHCP, MLD-Snooping, protection racine STP, UDLD, prise en charge LLDP, LACP, MIB, verrouillage d'adresse MAC, protection ARP dynamique, protection DHCP, GVRP, MVRP, NDP, CoS, ToS, prise en charge OpenFlow, protection CPU, ICMP, ICMP IRDP, VXLAN, MIB II, prise en charge LLDP-MED, protection BPDU STP
Type de boîtierMontable en baie 1U
Service et supportGarantie limitée - à vie
Protocole de routageOSPF, RIP, RIP-1, RIP-2, IGMPv2, IGMP, OSPFv2, routage IP statique, IGMPv3, OSPFv3, routage IPv4 statique, routage IPv6 statique, ECMP, RIPng, MLD, CIDR
Certification 80-PLUS80 PLUS Silver
Taille de la table MAC32 768 entrées
Tension secteur requiseCA 120/230 V (50/60 Hz)
Emplacements d'extension1 (total) / 1 (libre) x module d'empilement 1 (total) / 1 (libre) x emplacement d'extension
Algorithme de chiffrementMD5, SSL, TLS
Certifications du produitCISPR 22 Classe A, CISPR 24, EN 61000-3-2, IEC 61000-3-2, IEC 61000-3-3, IEC 61000-4-11, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, EN 61000-3-3, ICES-003 Classe A, UL 60950-1 Édition 2, CSA C22.2 N° 60950-1-07 Édition 2, VCCI Classe A, IEC 60825-1:2007, CNS 13438, EN 55024:2010, EN 55022:2010, IEC 60950-1:2005 + A1:2009 + A2:2013, EN 60825-1:2007, FCC CFR47 Partie 15 A, EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
Power Over Ethernet (PoE)PoE+
Nombre max. pris en charge2
Méthode d'authentificationRADIUS, PAP, CHAP, TACACS, TACACS+, Secure Shell v.2 (SSH2), Extensible Authentication Protocol (EAP)
Température de stockage max.70 °C
Température de stockage min.-40 °C
Prise en charge des trames Jumbo9220 octets
Protocole de gestion à distanceSNMP 1, SNMP 2, RMON 1, SNMP, Telnet, SNMP 3, SNMP 2c, HTTP, SSH, SSH-2, CLI, XRMON
Température de fonctionnement max.55 °C
Température de fonctionnement min.0 °C
Humidité relative de stockage admissible90 % (sans condensation)
Humidité relative de fonctionnement admissible15 - 95 % (sans condensation)

Dans la même catégorie